YASKAWA VIPA System SLIO Manual page 345

VIPA System SLIO
Event ID
0xE9A2
0xE9A3
0xE9A4
0xE9A5
0xE9A6
0xE9A7
0xE9A8
0xE9A9
0xE9AA
0xE9AB
0xEA00
0xEA01
0xEA02
0xEA03
HB300 | CPU | 013-CCF0R00 | en | 19-30
Description
OPC UA: TAR file invalid
ZINFO1: Platform
ZINFO3: Error code
OPC UA: Internal error of the OPC UA server
ZINFO1: Platform
ZINFO3: Error code
OPC UA: Hardware configuration of the control is not loaded, Server is not started
ZINFO1: Platform
OPC UA blocked by user, start of the server was prevented
ZINFO1: Platform
OPC UA server was started
ZINFO1: Platform
OPC UA server was stopped
ZINFO1: Platform
OPC UA was disabled by the user
ZINFO1: Platform
OPC UA was enabled by the user
ZINFO1: Platform
OPC UA: Lock by S7 configuration (access settings)
ZINFO1: Platform
OPC UA and WebVisu project not allowed at the same time
ZINFO1: Platform
Internal error - Please contact the hotline!
PK: Not relevant to user
DatID: Not user relevant
Internal error - Please contact the hotline!
PK: Not user relevant
ZINFO1: Slot
DatID: Not user relevant
SBUS: Internal error (internal plugged sub module not recognized)
PK: Not user relevant
ZINFO1: Slot
ZINFO2: Type identifier target
ZINFO3: Type identifier
DatID: Not user relevant
SBUS: Communication error between CPU and IO controller
OB: Operating mode
0: Configuration in operating condition RUN
System specific event IDs
345