Table of Contents
Advertisement
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
4.
Copy the wld file at a suited memory card. Plug this into your CPU and start it
again.
ð The transfer of the application program from the memory card into the CPU
takes place depending on the file name after an overall reset or PowerON.
S7PROG.WLD is read from the memory card after overall reset.
AUTOLOAD.WLD is read from the memory card after PowerON.
The blinking of the SD LED of the CPU marks the active transfer. Please regard
that your user memory serves for enough space for your user program, other-
wise your user program is not completely loaded and the SF LED gets on.
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Project transfer > Transfer via memory card
293
Advertisement
Table of Contents
