Table of Contents
Advertisement
Deployment OPC UA
Usage in Siemens SIMATIC Manager > Installation OPC UA Configurator
Registration of SPEED7
Studio in the Siemens
SIMATIC Manager as
OPC UA Configurator.
194
SPEED7 Tools Integration is automatically listed in the Windows Start menu during the
installation of the SPEED7 Studio.
1.
To start the SPEED7 Tools Integration, click in the Windows Start menu on
'VIPA GmbH è SPEED7 Tools Integration'.
ð For SPEED7 Tools Integration can start, you have to acknowledge the security
prompt to change the data on your computer with 'Yes' . Afterwards
SPEED7 Tools Integration will be started.
2.
Click at 'GSDML ...' .
3.
Navigate to your GSDML file of your VIPA-CPU, which you also use for your config-
uration in the Siemens 'SIMATIC Manager' . Select these and click at 'Confirm' .
You can also select and use several GSDML files.
ð The identified GSDML files are listed and the selection for the configuration
tools is enabled.
4.
Select the Siemens 'SIMATIC Manager' , in which the SPEED7 Studio is to be reg-
istered as OPC UA Configurator.
5.
Click on 'Start' .
n
SPEED7 Studio is registered in the Windows registry as
ð
OPC UA Configurator.
In the Siemens SIMATIC Manager the OPC UA Configurator is registered
n
as externally callable program.
n
All changes are recorded in a log file, which you can output via 'Log file' .
6.
'Close' closes SPEED7 Tools Integration.
ð With the next start of the Siemens hardware configurator, the SPEED7 Studio
can be called as OPC UA Configurator with to OPC UA configuration limited
functions. More information about the usage can be found in the in the online
help of the OPC UA Configurator.
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
