Table of Contents
Advertisement
System specific event IDs
Event ID
0xE920
0xE980
0xE981
0xE982
0xE983
0xE984
0xE985
0xE986
0xE987
0xE988
0xE989
0xE9A0
0xE9A1
344
Description
ZINFO2: Slot
ZINFO3: Data width
Configuration error PROFINET
ZINFO1 - Position 0: Error code
1: Double IP/PROFINET configuration in slot 2 and 4
2: PROFINET IO system configured in slot 4
3: Too many PROFINET IO controller configured
4: Virtual device multiple configured
5: EtherCAT devices for PROFINET CP configured
6: PROFINET devices for EtherCAT CP configured
7: PROFINET CP configured at slot 2, although this is not supported
8: A PROFINET IO system (I-Device) must not be configured on the CP on slot 4
9: A PROFINET IO system (controller) must not be configured on the CP on slot 4
Error when loading the WebVisu project file
ZINFO1: Platform
Error in the configuration of the WebVisu project
ZINFO1: Platform
Internal error of the WebVisu server
ZINFO1: Platform
Hardware configuration of the control is not loaded, WebVisu is not started
ZINFO1: Platform
WebVisu is blocked by the user, start of the WebVisu was prevented
ZINFO1: Platform
WebVisu was started
ZINFO1: Platform
WebVisu was stopped
ZINFO1: Platform
WebVisu was enabled by the user
ZINFO1: Platform
WebVisu was disabled by the user
ZINFO1: Platform
WebVisu and OPC UA project not allowed at the same time
ZINFO1: Platform
Error when loading the OPC UA project file
ZINFO1: Platform
ZINFO3 - Bit 0: Error code
OPC UA: No FSC enabled
ZINFO1: Platform
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
