Analog Input; Digital Input - YASKAWA VIPA System SLIO Manual

Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Digital input
12.6.2

Analog input

12.6.2.1 Overview
12.6.2.2 Parametrization in SPEED7 Studio
12.6.2.2.1 'I/O addresses'
Sub module Input address
AI2 800
802
12.6.2.2.2 'Parameter'
'Filtering channel 0/1'
12.6.3

Digital input

12.6.3.1 Overview
12.6.3.2 Parametrization in SPEED7 Studio
12.6.3.2.1 'I/O addresses'
Sub module Input address
DI16/DO12 136
137
12.6.3.2.2 'Inputs'
'Trigger for process
interrupt'
278
2xUx12Bit (0 ... 10V)
n
n Sub module 'AI2'
Ä Chap. 5.3 'Analog input' page 120
n
Access
WORD
WORD
The analog input part has a filter integrated. The parametrization of the filter happens via
the parameter 'Filter channel 0/1' . The default value of the filter is 1000ms. The following
values can be entered:
2ms: no filter
n
100ms: small filter
n
n 1000ms: medium filter
n 10000ms: maximum filter
n 16xDC 24V
n Sub module 'DI16/DO12'
n Ä Chap. 5.4 'Digital input' page 123
Access
BYTE
BYTE
Here you can specify a hardware interrupt for each input for the corresponding edge. The
hardware interrupt is disabled, if nothing is selected (default setting). A diagnostics inter-
rupt is only supported with Hardware interrupt lost.
Assignment
Analog input channel 0 (X4)
Analog input channel 1 (X4)
Assignment
Digital input I+0.0 ... I+0.7 (X4)
Digital input I+1.0 ... I+1.7 (X4)
HB300 | CPU | 013-CCF0R00 | en | 19-30
VIPA System SLIO