YASKAWA VIPA System SLIO Manual page 351

VIPA System SLIO
Event ID
0xEA65
0xEA66
0xEA67
HB300 | CPU | 013-CCF0R00 | en | 19-30
Description
ZINFO1 - Bit 15: Assume IP address in another way. Is not supported for the IP address of the controller.
ZINFO2 - Bit 0: Incompatible configuration (SDB version not supported)
ZINFO2 - Bit 1: EtherCAT: EoE configured but not supported (Possible cause is a too short cycle time of
the EtherCAT master system. When using EoE terminals, at least a cycle time of 4ms must be config-
ured.)
ZINFO2 - Bit 2: DC parameter invalid
ZINFO2 - Bit 3: I device configuration invalid (slot gap)
ZINFO2 - Bit 4: MRP configuration invalid (client)
ZINFO2 - Bit 5: Transfer rate 10 MBit (HD/FD) configured but not supported
Internal error - Please contact the hotline!
PK: Platform
0: none
8: CP
9: Ethernet CP
10: PROFINET CP
12: EtherCAT CP
16: CPU
ZINFO1: ServiceID in which the error occurred
ZINFO2: Command in which the error occurred
1: Request
2: Connect
3: Error
PROFINET IO controller: Error in the communication stack
OB: StackError.Service
PK: Rack/slot
ZINFO1: StackError.Error.Code
ZINFO2: StackError.Error.Detail
ZINFO3 - Position 0: StackError.Error.AdditionalDetail
ZINFO3 - Position 8: StackError.Error.AreaCode
DatID: StackError.DeviceRef
PROFINET IO controller: Error reading dataset
OB: Rack/slot of the controller
PK: Error type
0: Dataset error local
1: Dataset error stack
2: Dataset error station
ZINFO1: Dataset number
ZINFO2: Dataset handle (caller)
ZINFO3: Internal error code from PN stack
System specific event IDs
351