Table of Contents
Advertisement
System specific event IDs
Event ID
0xE011
0xE012
0xE013
0xE014
0xE015
0xE016
0xE017
0xE018
0xE019
0xE01A
0xE01B
0xE020
0xE030
0xE033
0xE0B0
0xE0C0
0xE0CB
328
Description
ZINFO2: Slot
ZINFO3: Type identifier
Master project engineering at slave CPU not possible or wrong slave configuration
Error at configuration standard backplane bus
Error at shift register access to standard backplane bus digital modules
Error in Check_Sys
Error in access to master
ZINFO2: Slot of the master
ZINFO2: Page frame master
Maximum block size exceeded in master transfer
ZINFO1: Periphery address
ZINFO2: Slot
Error in access to integrated slave
Error in mapping the master periphery
Error on standard backplane bus system detection
Error at detection of the operating mode (8/9 bit)
Error: Maximum number of plug-in components exceeded
Error: Interrupt information undefined
ZINFO1: Rack/Slot
ZINFO3: Error type
4: Rack/Slot (in ZINFO1) undefined
5: Alarm type (in DatID) undefined
DatID: Interrupt type
Error of the standard backplane bus
Internal error - Please contact the hotline!
SPEED7 is not stoppable
ZINFO1: Not user relevant
ZINFO2: Not user relevant
ZINFO3: Not user relevant
DatID: Not user relevant
Not enough memory space in the working memory for code block (block too large)
Error on SSL access
ZINFO1: Error
4: SSL wrong
5: Sub-SSL wrong
6: Index wrong
ZINFO2: SZL-ID
ZINFO3: Index
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
