YASKAWA VIPA System SLIO Manual page 89

VIPA System SLIO
Variant 3: Modules are ignored
(1): Target configuration
(2): Actual configuration
Determination of Mapping values of record set 0x7F:
n Byte 0: The module of Slot
n Byte 1: The module of Slot
Byte 2: The module of Slot
n
n Byte 3: The module of Slot
n Byte 4: The module of Slot
n Byte 5: The module of Slot
HB300 | CPU | 013-CCF0R00 | en | 19-30
Slot Slot
target
1 empty
2 empty
3 3
4 4
5 5
6 6
= 1 is ignored in the actual configuration à Mapping = 0x00
target
= 2 is ignored in the actual configuration à Mapping = 0x00
target
= 3 is in the actual configuration at Slot
target
= 4 is in the actual configuration at Slot
target
= 5 is in the actual configuration at Slot
target
= 6 is in the actual configuration at Slot
target
Slot - The mapping always refers to the slot of the target configuration.
target
Slot - Slot of the actual configuration on which the module of the target configura-
actual
tion is located.
Mapping - For variant 3, Mapping corresponds to the value of Slot
actual configuration on which the module of the target configuration is
located. If modules of the target configuration are to be ignored, for Mapping
the value 0x00 is to be used.
The presence of gaps in the System SLIO is not allowed! But you can
place modules and define them via the configuration as empty slot for the
target hardware configuration.
Setting VIPA specific CPU parameters > Free Module Mapping
Record set 0x7F
actual
Byte Mapping
0 0x00
1 0x00
2 0x03
3 0x04
4 0x05
5 0x06
actual
actual
actual
actual
Deployment CPU 013-CCF0R00
= 3 à Mapping = 0x03
= 4 à Mapping = 0x04
= 5 à Mapping = 0x05
= 6 à Mapping = 0x06
actual
, i.e. slot of the
89