Table of Contents
Advertisement
Deployment CPU 013-CCF0R00
Hardware configuration - CPU
70
6.
Use [New] to create a new subnet and assign valid IP address data for your
PROFINET system.
With firmware version V2.4.0 and up, you can access the Ethernet
PG/OP channel via this IP address data. The configuration via an
additional CP is no longer required, but still possible.
'Hardware configuration - Ethernet PG/OP channel' page 72
7.
Click at the sub module 'PN-IO' of the CPU and open with 'Context menu
è Properties' the properties dialog.
8.
Enter at 'General' a device name. The device name must be unique at the Ethernet
subnet.
9.
Navigate in the hardware catalog to the directory 'PROFINET IO
è Additional field devices è I/O è VIPA SLIO System' and connect the IO device
'013-CCF0R00 CPU' to your PROFINET system.
ð In the slot overview of the PROFINET IO device 'VIPA SLIO System' the CPU
is already placed at slot 0. From slot 1 you can place your System SLIO
modules.
VIPA System SLIO
Ä Chap. 4.7
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
