Table of Contents
Advertisement
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Project transfer > Transfer via memory card
12.9.3
Transfer via memory card
Proceeding transfer via
memory card
292
4.
To transfer the user program and hardware configuration click in the Project tree at
your CPU and select 'Context menu è Transfer all'.
ð A dialog window for project transfer opens
5.
Select the 'Port type' "Ethernet interface" and start the transfer with 'Transfer' .
6.
Confirm the request that the CPU is to be brought into the state STOP.
ð The user program and the hardware configuration are transferred via Ethernet
to the CPU.
7.
Close after transmission the dialog.
8.
With 'Context menu è Copy RAM to ROM' you can save your project on a memory
card, if one is plugged.
The memory card serves as external storage medium. There may be stored several proj-
ects and sub-directories on a memory card. Please regard that your current project is
stored in the root directory and has one of the following file names:
n
S7PROG.WLD
n
AUTOLOAD.WLD
1.
Start the SPEED7 Studio with your project.
2.
Click in the 'Project tree' at the CPU.
3.
Create in the SPEED7 Studio with 'Context menu
è Export device configuration (WLD)' a wld file.
ð The wld file is created. This contains the user program and the hardware config-
uration
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
