Table of Contents
Advertisement
VIPA System SLIO
Delete WebVisu
HB300 | CPU | 013-CCF0R00 | en | 19-30
4.
Here click at 'WebVisu configuration'
ð In this settings window, you can create a WebVisu project for your CPU.
5.
To create a WebVisu project, click at [
ð A new WebVisu project is created and listed in the 'Project tree' . At 'WebVisu -
general configurations' and 'WebVisu - SSL configurations' , you can make fur-
ther settings.
WebVisu - general configurations
n
Port number
–
Enter the port number under which the WebVisu should be accessible.
–
Port number: 8080 (default): The WebVisu can be accessed via the IP address
and port 8080. The Device web page can be accessed via the IP address and
port 80.
–
Port number: 80: The WebVisu can be accessed via the IP address and port 80.
The Device web page can be accessed via the IP address and port 8080.
n
Polling interval (ms)
–
Enter here the interval for the cyclical refresh of the web content.
n
Execution device
–
Select 'CPU' as device on which this WebVisu project is to be executed.
–
WebVisu projects for Ethernet CPs are not supported by this CPU.
WebVisu - SSL configurations
n
Enabling encoding
–
When enabled, you have SSL-encrypted access to your WebVisu.
n
Disable HTTP
–
When activated, the access happens via HTTPS.
n
SSL port number
–
SSL port number 443 (default): The secure access to the WebVisu takes place
via the IP address and port 443. The Device web page can be accessed via the
IP address of the CPU and port 8080.
n
Original path of the certificate used
–
Here you can upload a security certificate.
–
Only security certificates in PEM format are supported.
–
The file must contain the certificate and the private key.
Click in the 'Project tree' at WebVisu Project and select 'Context menu
è Delete WebVisu'.
ð The WebVisu project is removed from the configuration.
Deployment WebVisu - Web visualization
WebVisu editor > Creating a WebVisu project
Add WebVisu ].
211
Advertisement
Table of Contents
