Table of Contents
Advertisement
VIPA System SLIO
12
Configuration with VIPA SPEED7 Studio
12.1
SPEED7 Studio - Overview
SPEED7 Studio - Working
environment
Starting the SPEED7
Studio
HB300 | CPU | 013-CCF0R00 | en | 19-30
In this part the project engineering of the VIPA CPU in the VIPA SPEED7 Studio is
shown. Here only the basic usage of the SPEED7 Studio together with a VIPA CPU is
shown. Please note that software changes can not always be considered and it may thus
be deviations to the description. In the SPEED7 Studio your VIPA PLCs may be config-
ured and linked. For diagnostics online tools are available.
More information can be found in the online help respectively in docu-
mentation of the SPEED7 Studio.
Click at the button. You can find SPEED7 Studio in Windows Start at 'VIPA'.
ð SPEED7 Studio is started. The start page is opened.
(1) Start
You can create a new project, open a saved project, or delete projects.
(2) Project
If a project is open, you can open the 'Project overview' or add a new
device.
(3) Last projects Here recently opened projects are listed.
You can repeatedly run SPEED7 Studio in order to work with
different projects. You can not open the same project in the var-
ious instances of SPEED7 Studio.
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Overview
267
Advertisement
Table of Contents
