Transfer Via Memory Card - YASKAWA VIPA System SLIO Manual

Configuration with TIA Portal
TIA Portal - Project transfer > Transfer via memory card
13.10.3

Transfer via memory card

Proceeding
322
The memory card serves as external storage medium. There may be stored several proj-
ects and sub-directories on a memory card. Please regard that your current project is
stored in the root directory and has one of the following file names:
n S7PROG.WLD
n AUTOLOAD.WLD
1. Start the Siemens TIA Portal with your project.
2. Create a wld file with 'Project è Memory card file è New'.
ð The wld file is shown in the Project tree at "SIMATIC Card Reader" as "Memory
card file".
3. Copy the blocks from the Program blocks to the wld file. Here the hardware configu-
ration data are automatically copied to the wld file as "System data".
4. Copy the wld file at a suited memory card. Plug this into your CPU and start it
again.
ð The transfer of the application program from the memory card into the CPU
takes place depending on the file name after an overall reset or PowerON.
S7PROG.WLD is read from the memory card after overall reset.
AUTOLOAD.WLD is read from the memory card after PowerON.
The blinking of the SD LED of the CPU marks the active transfer. Please regard
that your user memory serves for enough space for your user program, other-
wise your user program is not completely loaded and the SF LED gets on.
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30