●
It is not necessary to specify a port number to send a document to the Advanced Box of this machine, if it has an
imagePASS attached.
●
When sending documents from the machine with imagePASS attached to its own Advanced Box, you may not be
able to send them by specifying a loop back address if <Proxy Settings> in
to <On>. In this case, enter the IP address of imagePASS.
●
For instructions on sending documents from this machine to the Advanced Box of this machine, see
Destinations in the Address Book(P. 223) .
◼
When Using the Remote UI
●
Before starting the Remote UI, configure the <Network Settings> items in <Fiery> on the control panel.
●
To start the Remote UI, start the Web browser and enter the URL below. The Remote UI starts when you click
[Launch Remote UI] on the WebTools screen that is displayed.
http://<IP address of imagePASS>/
◼
When Using the Print Function
●
imagePASS cannot be used together with the print function that is standard-equipped with the machine or the PS
Printer Kit.
◼
Other Restrictions
●
The machine with imagePASS attached must be restarted each time a DNS dynamic update is performed.
●
When imagePASS is attached, the machine cannot automatically obtain the IP address of the SIP server by using
DHCP.
Appendix
1480
<Preferences>
<Network> is set
Registering