Canon imageRUNNER ADVANCE C5560i III User Manual page 1559

◼
External View
Auxiliary Tray
Pull out the auxiliary tray if you are outputting large size paper.
Output Tray
Paper is output to the output tray.
Staple Button
Press this button when you manually staple paper (Manual Stapling). You can also staple paper without
pressing the button. You can specify the time period for the paper to be stapled after inserting the paper.
<Adjust Action>
Slit
Insert paper to manually staple the paper. You can specify the time period for the paper to be stapled after
inserting the paper.
Punch waste tray (Inner 2/4 Hole Puncher-B/Inner 2/3 Hole Puncher-B)
Pull out to discard punch waste.
Front cover
Open to remove jammed paper, clear a staple jam in the stapler unit, or replace the staple cartridge.
Selecting the Staple Position
To finish with the stapler, you need to select the staple position paying attention to the orientation of original
document.
● For the procedure to finish with the stapler, see
Stapling at One Location in a Corner of the Paper (Corner)
Refer to the following figures to select the staple position.
● Stapling at the top right of paper in portrait orientation
Appendix
<Time Until Stapling Starts in Stapler Mode>(P. 1073)
Emptying the Punch Waste (Optional)(P. 1186)
Finishing with the Stapler(P. 292)
1545