Building A Dual Network Environment - Canon imageRUNNER ADVANCE C5560i III User Manual

Building a Dual Network Environment

Do you have separate machines in each department or floor of the same office for security purposes?
In addition to single connections with a wired LAN or wireless LAN, this machine enables dual network environments
with both a wired LAN and wireless LAN or a wired LAN and another wired LAN via a USB-LAN adapter*. This makes it
easy to build network environments where employees use the main line and customers use a sub line with restricted
functionality. It also contributes to reduced costs as it is not necessary to install a machine for each network
environment.
* For information on the supported USB-LAN adapters, contact your local authorized Canon dealer.
This machine and the User's Guide refer to the main wired LAN in a dual network as the "main line". The sub wireless
LAN or another wired LAN in a dual network is referred to as the "sub line."
Flow of Settings Required for a Dual Network(P. 1405)
Cautions When Using the Sub Line(P. 1406)
Flow of Settings Required for a Dual Network
In a dual network, the main line and sub line have separate settings. This section describes the settings required for
the sub line network.
● Specify the wired LAN/wireless LAN settings common to the main and sub lines, as required.
Connecting to a Wired LAN(P. 27)
Connecting to a Wireless LAN(P. 28)
Step 1
●
Step 2
●
Selecting the Network Connection Method(P. 25)
Select <Wired LAN + Wireless LAN> or <Wired LAN + Wired LAN>.
Setting the IPv4 Address of the Sub Line(P. 42)
Specify the IPv4 address settings from <IP Address Settings> in <Sub Line Settings>. When
using static routing, also set a gateway address.
Appendix
1405
4XR3-0YH