Canon imageRUNNER ADVANCE C5560i III User Manual page 1557

● Making punch holes in the top margin area of paper in landscape orientation
When Placing A4-, B5-, A5-size Originals
Feeder
● For information on the paper sizes that can be used for Staple, Saddle Stitch, Hole Punch, and Saddle Fold,
see Staple Finisher-Y(P. 1505) and
● To replace the staple cartridge of the stapler unit or saddle stitcher unit, see
(P. 1176) .
● For how to clear a paper jam or a staple jam, see
Jams (Optional)(P. 1367) .
● The maximum number of bindable sheets may not be possible, depending on the paper type. In this case,
change the paper type, or reduce the number of sheets to bind.
Collate and group
● If you select <Offset> in combination with the collate or group function, each printout group is shifted.
● Once an output tray has reached its stacking limit, subsequent prints are automatically delivered to the next
available tray. If all of the available trays have reached their stacking limits, printing stops. Remove all of the
output paper from the trays to resume printing.
Staplers
● When you are using the Staple mode, do not remove the stack of paper from the output tray during the job.
Remove the stack of paper when the job has been completed.
● If the <Load staples into the stapler unit.> message appears, almost all of the staples have been used. To
proceed, replace the staple cartridge.
● If a tray reaches the lowest position limit, printing stops temporarily. Remove all of the output paper from
the tray to resume printing.
Saddle stitch
● The accuracy of folds may vary depending on the paper type and the number of sheets.
Appendix
Platen glass
Booklet Finisher-Y(P. 1507) .
Clearing Paper Jams(P. 1337) and
1543
Loading Staples (Optional)
Clearing Staple