Restrictions When Connecting to imagePASS
When imagePASS is attached, some functions are restricted on the machine. For more information, see the manual for
imagePASS.
◼
Functions Restricted When Connecting to imagePASS
●
Wireless LAN (including the sub line)
●
Wired LAN (sub line)
●
Setup Guide
●
Connected Sleep
●
Forced Hold Printing
●
Encrypted Secure Print
●
Direct Print
●
Direct Print (JPEG)
●
WSD Scan
●
Mopria
●
NFC function
●
Hold function
●
Even if <RX Timeout> is set for each item in
always occurs in 5 minutes.
●
In
<Preferences>
even if it is set to <On>.
●
Even if <Forced Print of Recognition Information> in
Settings> is set to <On>, the IP address is not printed.
◼
When Using the Advanced Box
●
SMB cannot be used to make the Advanced Box available to the outside. Use WebDAV instead.
●
When specifying the URI TX settings in the detailed settings of the Advanced Box, it is necessary to specify the port
number (when TLS is disabled: 18080, when TLS is enabled: 18443) in the path to the target folder for notification.
Example:
http://192.168.1.21:18080/share/folder (to specify the "folder" folder in the Shared Space, when TLS is
disabled)
●
Select [WebDAV] to save documents in the Advanced Box of the imageRUNNER ADVANCE Series with imagePASS
attached.
●
When sending to the Advanced Box of an imageRUNNER ADVANCE series machine with an imagePASS attached,
specify [Host Name] as indicated below.
When TLS is disabled:
http://<IP address or host name>:18080
When TLS is enabled:
https://<IP address or host name>:18443
Appendix
<Preferences>
<Timer/Energy Settings>, <Quick Startup Settings for Main Power> is disabled
1479
<Network> <TCP/IP Settings>, a timeout
<Function Settings> <Common>
4XR3-0W4
<Print