Management Functions
◼
Information Registered in User Authentication
Up to 5,001 users can be registered.
◼
Registering Department IDs
Up to 1,000 Department IDs can be registered.
◼
Authentication Functions
●
When an Active Directory server is specified as an authentication server, the following system environment is
required.
Software (operating system):
*1 64-bit operating systems are not supported.
*2 Users cannot log in with Active Directory authentication if Kerberos Armoring is enabled for KDCrelated policies (group policies). Make
sure to disable Kerberos Armoring.
●
Kerberos encryption methods for the Active Directory authentication supported by the current version of User
Authentication are as follows.
Encryption method
●
The available encryption methods may vary, depending on the Active Directory settings.
●
Of the available encryption methods, the one with the highest cipher strength is automatically selected.
●
When specifying an Active Directory server as an authentication server, use the following ports
To communicate with a DNS server:
To communicate with a KDC (Key Distribution Center):
To communicate with a server for LDAP directory service (can be changed to an arbitrary port
number for the LDAP service):
*1 The above port numbers are default values. These numbers may vary depending on the selected settings.
●
When specifying an LDAP server as an authentication server, the following system environment is required.
Appendix
*1
Windows Server 2008 SP2
*2
Windows Server 2012 R2
/Windows Server 2016
●
128-bit AES (Advanced Encryption Standard)
●
256-bit AES (Advanced Encryption Standard)
●
DES (Data Encryption Standard)
●
RC4
1468
/Windows Server 2008 R2 SP1/Windows Server 2012
*2
/Windows Server 2019
4XR3-0W1
*2
/
*2
*1
on the server.
port number 53
port number 88
port number 389