Canon imageRUNNER ADVANCE C5560i III User Manual page 1459

[Starting]
● If you click the [Start] / [Stop] button located on the right side of the operation status, you can start/stop
the use of the MEAP application.
● If you click [Uninstall], the MEAP application is uninstalled.
● For the license status, one of the following is displayed.
Depending on the MEAP application, the license file may have a term of validity. In addition, the maximum
number (counter) for printing or scanning is predetermined.
[Installed]
[Not Installed]
[Over Limit]
[Invalid]
[Unnecessary]
If [Over Limit] or [Invalid] appears
● If the validity of the license file expires or a counter exceeds the maximum value, the MEAP application
cannot be used. By adding a license, you can extend the validity or increase the counter's maximum value.
Managing MEAP Application Licenses(P. 1448)
[To Portal]/[Log Out]
Click to display the portal page of the Remote UI or the login screen of the Remote UI.
Starting or stopping the use of a MEAP application
If you selected [Only Install] in the installation of the MEAP application, you need to start the MEAP application.
When you update a MEAP application, stop the MEAP application.
1
Click [MEAP Application Management].
2
Click [Start] / [Stop] for the MEAP application to be used.
The MEAP application is stopping.
The valid license is installed.
Unable to use the MEAP application as the license file is not installed or is disabled.
Some counters set for the MEAP application exceed the maximum value.
The validity for the license file has expired or all counters set for the MEAP application exceed the
maximum value.
You can use the MEAP application even if you do not have a license file.
Appendix
1445