Fax Function - Canon imageRUNNER ADVANCE C5560i III User Manual

Fax Function

The optional Super G3 FAX Board is needed to use the Fax function.
*1
Telephone Line Used
Scan Line Density
Transmission Speed
Compression Method
Transmission Type
Sending Original Sizes
Receiving Paper Sizes
No. of Memory RX Jobs
Transmission Times
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone
line. It is recommended to use facsimile communication via a general telephone (Public Switched Telephone Network)
line.
*2 Pels stands for picture elements (pixels).
*3 Sent as B4.
*4 Sent as A4.
◼
Max. Destinations for Sequential Broadcast Transmission
● You can specify and send to up to 256 destinations at the one time. (If you specify a group, which is made up of
several destinations, each destination is counted as a separate destination.)
Public Switched Telephone Network (PSTN)
Normal
*2
G3: 8 pels /mm x 3.85 line/mm
Fine
*2
G3: 8 pels /mm x 7.7 line/mm
Super-Fine
*2
G3: 8 pels /mm x 15.4 line/mm
Ultra-Fine
*2
G3: 16 pels /mm x 15.4 line/mm
Super G3: 33.6 kbps
G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
*3 *3
A3, B4, A4, A4R, B5 , B5R , A5, A5R
A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", LGL, LTR, LTRR, STMTR, 8K, and 16K
Up to 320 jobs
JBIG: Approximately 2.6 seconds (When sending A4 Canon original paper, Normal 8 pels x 3.85
line/mm ECM (JBIG))
Appendix
*4
, 11" x 17", LGL, LTR, LTRR, and STMTR
1459
4XR3-0UW