Canon imageRUNNER ADVANCE C5560i III User Manual page 1483

Software:
Operating system:
● When specifying an LDAP server as an authentication server, use the following ports
To communicate with the LDAP server using LDAP (when TLS is enabled): port number 636
To communicate with the LDAP server using LDAP (when TLS is disabled): port number 389
*1 The port numbers can be changed according to the LDAP server settings.
◼
Firewall Settings
● When specifying IP addresses in firewall settings, up to 16 IP addresses (or ranges of IP addresses) can be specified
for both IPv4 and IPv6.
● When specifying MAC addresses in firewall settings, up to 100 MAC addresses can be specified.
● The exception addresses and exception port numbers that can be used for communication using the sub line and
are registered by default are indicated below.
Exception addresses:
Exception port numbers:
* Inbound filter only
◼
Registration of Certificates (User Signature Keys/Certificates, CA Certificates, S/MIME
Certificates)
● The algorithms and formats of keys and certificates that can be registered are as follows.
RSA signature algorithm:
RSA public-key algorithm (key length):
DSA signature algorithm:
DSA public-key algorithm (key length):
ECDSA signature algorithm:
ECDSA public-key algorithm (key length):
Certificate format:
Appendix
OpenLDAP
Requirements are pursuant to the product specifications of the LDAP server.
0.0.0.1 to 255.255.255.255
53, 67, 68, 80, 161, 443, 515*, 631*, 3702, 5353, 5357, 5358, 8000*, 8080, 8443*, 9013,
9100*, 10443*, 20010*, 47545
SHA-1/SHA-256/SHA-384
RSA (512 bits
SHA-1
DSA (1024 bits/2048 bits/3072 bits)
SHA-1/SHA-256/SHA-384/SHA-512
ECDSA (P256/P384/P521)
User Signature Keys/Certificates: PKCS#12
Keys, Certificates: PKCS#12*
1469
*1
on the server.
*1 *1
/SHA-512 /MD2
*2
/1024 bits/2048 bits/4096 bits
4
*2 *2
/MD5
*2
)
*3