Canon imageRUNNER ADVANCE C5560i III User Manual page 1456

● Files with a "jar" extension are application files.
● Files with an "lic" extension are license files.
5
Select the operation to perform after installation.
● To start the application after installation, select [Install and Start]. If you do not want to start the application
after installation, select [Only Install].
6
Click [Install]
● When the licensing screen is displayed, confirm the contents and click [I Accept].
➠
When installation is complete, the MEAP Application Management screen is displayed.
● Depending on the MEAP application, the user's manual or related software can be downloaded from the
following URL. http://canon.com/fau/downloads
● You can upgrade the MEAP application version in the same procedure as the installation. Stop the MEAP
application on the SMS screen before installing.
● The maximum amount of hard disk that applications can use is approximately 4 GB.
● If the machine is performing its shutdown process while an application is being installed, an error message
may be displayed on the Install page for SMS, and the installation may be cancelled. In this case, try
installing the MEAP application again after restarting the machine (turn the main power switch Off, and then
On). For instructions on turning On/Off the machine, see
ON the Machine(P. 106) .
Appendix
[Yes].
Managing MEAP Applications(P. 1443)
Turning OFF the Machine(P. 107) ,
1442
Turning