Isdn Terminal At The Internal Up0 Port - Auerswald COMpact 5200 Instruction Manual

Installation
If PBX and terminal have a
short distance to each other,
make the connection with an
ISDN cable (max. 10 m) at the
RJ-45 sockets of the internal S
port.
If the distance between PBX
and terminal is greater, lay the
lines fixed at the terminal
clamps of the internal S
ISDN Terminal at the Internal U
Connection possibilities:
• System telephones COMfortel 1200/1400/1600/2600 (firmware version 2.0A or later)
• ISDN telephones in accordance with the Euro ISDN Standard (DSS1)
• ISDN PC controllers in accordance with the Euro ISDN Standard (DSS1)
Requirements:
• Enabled operating mode "U
• Enabled terminators in the PBX at the internal U
operating mode "U internal"
P0
56
0
port.
0
Port
P0
internal" at the U
P0
COMpact 5200/5200R/5500R - Instructions V03 03/2019
internal S port
0
IAE/UAE8
terminators
100 Ohm, 0.25 W
port in question
P0
port in question
P0
terminators enabled