Parameters - Siemens SINAMICS G150 Operating Instructions Manual

9.2.7.4

Parameters

• r0051
• p0130
• p0180
• p0186
• p0819[0...2]
• p0820
• p0821
• p0822
• p0823
• p0824
• p0826
• p0827
• p0828
• r0830
• p0831
• p0833
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Drive data set DDS effective
Motor data sets (MDS) number
Drive data set (DDS) number
Motor data sets (MDS) number
Copy drive data set DDS
BI: Drive data set selection DDS, bit 0
BI: Drive data set selection DDS, bit 1
BI: Drive data set selection DDS, bit 2
BI: Drive data set selection DDS, bit 3
BI: Drive data set selection DDS, bit 4
Motor changeover, motor number
Motor changeover status word bit number
Motor changeover, feedback signal
Motor changeover, status
Motor changeover, contactor feedback signal
Data set changeover configuration
Functions, monitoring, and protective functions
9.2 Drive functions
503