Configure The Drive Unit - Siemens SINAMICS G150 Operating Instructions Manual

5.3.2

Configure the drive unit

In the project navigator, open the component that contains your drive unit.
Figure 5-12 Project navigator – configuring the drive unit
⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign becomes a minus sign and the drive unit configuration options are displayed
as a tree below the drive unit.
⇒ Double-click Configure the drive unit.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
5.3 Procedure for commissioning with STARTER
Commissioning
207