Siemens SINAMICS G150 Operating Instructions Manual page 427

Parameter
• r1119
• p1120
• p1121
• p1130
• p1131
• p1134
• p1135
• p1136
• p1137
• p1138
• p1139
• p1140
• p1141
• p1142
• P1143
• P1144
• p1145
• P1148
• r1149
• r1150
• p1151
• r1199.0...8 Ramp-function generator status word
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
CO: Ramp-function generator setpoint at the input
Ramp-function generator ramp-up time
Ramp-function generator ramp-down time
Ramp-function generator initial rounding time
Ramp-function generator final rounding time
Ramp-function generator rounding type
OFF3 ramp-down time
OFF3 initial rounding time
OFF3 final rounding time
CI: Ramp-function generator ramp-up time scaling
CI: Ramp-function generator, ramp-down time
BI: Enable ramp-function generator/disable ramp-function generator
BI: Continue ramp-function generator/freeze ramp-function generator
BI: Enable setpoint/inhibit setpoint
BI: Accept ramp-function generator setting value
CI: Ramp-function generator setting value
Ramp-function generator tracking intensity
Ramp function generator tolerance for ramp-up and ramp-down active
CO: Ramp-function generator acceleration
Ramp-function generator speed setpoint at the output
CO: Ramp-function generator configuration
Setpoint channel and closed-loop control
7.2 Setpoint channel
427