Options For Motor Menu (1) - First Half; Motor Parameter Menu (1000) Parameters - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Parameter Assignment/Addressing

6.3 Options for Motor Menu (1) - first half

6.3 Options for Motor Menu (1) - first half
Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default configuration.
The Motor Menu (1) consists of the following menu options:
• Motor Parameter Menu (1000)
• Limits Menu (1120)
• Speed Derate Curve Menu (1151)
• Auto-tune Menu (1250)
• Encoder Menu (1280)
• Current Profile Menu (1092)
These menus are explained in the tables that follow.
Table 6-2

Motor Parameter Menu (1000) Parameters

Parameter ID
Motor frequency 1020
Full load speed 1030
Motor voltage 1040
Full load current 1050
No load current 1060
Mag current thresh 1061
Motor kW rating 1010
Leakage induc‐ 1070
tance
90
Unit Default Min
Hz 60.0 15.0
RPM 1780 1
V 4160 380
A 125.0 12.0
% 25.0 0.0
% 80.0 50.0
kW 746.0 90.0
% 16.0 0.0
Max Description
400.0 Enter the rated or base frequency of the mo‐
tor from the nameplate.
31500 Enter the full load speed of the motor from
the nameplate. Full load speed is base or
rated speed minus slip.
13800 Enter the rated voltage for the motor from
the nameplate.
1500.0 Enter the rated nameplate full load current
of the motor.
100.0 Enter the no load current of the motor from
the nameplate, if it is provided, or use the
default value. Use of auto-tune stage 2 is
NOT recommended except in special circum‐
stances. See note in auto-tune description.
100.0 Threshold of reactive current needed to
magnetize before a 'Failed to Magnetize'
fault occurs.
100000.0 Enter the motor kW (0.746 * Hp) from the
nameplate.
30.0 Enter the motor leakage inductance based
on percent of drive base impedance if provi‐
ded on nameplate or motor sheet, or calcu‐
late using auto-tune stage 1.
NXGPro+ Control Manual
Operating Manual, A5E50491925A