Siemens SINAMICS G150 Operating Instructions Manual page 229

Configuring a web server
Figure 5-30
⇒ Configure the web server.
The Web server is activated in the factory setting.
Activate and deactivate the web server under Activate web server.
Select Only allow access via secure connection (https) if necessary.
Note
Industrial Security
Observe the notes on industrial security.
⇒ Click Continue >.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Configuring a web server
5.3 Procedure for commissioning with STARTER
Commissioning
229