Installing The Starter Commissioning Tool - Siemens SINAMICS G150 Operating Instructions Manual

Commissioning
5.2 STARTER commissioning tool
5.2.1

Installing the STARTER commissioning tool

STARTER is installed using the "setup" file on the customer DVD supplied. When you
double-click the "Setup" file, the installation Wizard guides you through the process of
installing STARTER.
Note
Installation time
The installation time depends on the computer performance and from where the software is
installed (e.g. DVD, hard disk, network). We recommend that you install the software from a
local data carrier.
5.2.2 Layout of the STARTER user interface
STARTER features four operating areas:
Figure 5-1
198
STARTER operating areas
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A