Siemens SINAMICS G150 Operating Instructions Manual page 209

Selecting options
Figure 5-14
⇒ From the combination box Options selection: select the options belonging to your drive
unit by clicking on the corresponding check box (see type plate).
NOTICE
Damage to the dv/dt filter if it is not activated during commissioning
The dv/dt filter may be damaged if it is not activated during commissioning.
• Activate the dv/dt filter during commissioning by activating the appropriate checkbox
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Selecting options
(option L07, L10).
5.3 Procedure for commissioning with STARTER
Commissioning
209