Tm150 Temperature Sensor Module (Option G51) - Siemens SINAMICS G150 Operating Instructions Manual

Converter cabinet units 1750 kw 2700 kw
Hide thumbs Also See for SINAMICS G150:
Table of Contents

Advertisement

Electrical installation
4.10 Other connections
4.10.17

TM150 temperature sensor module (option G51)

4.10.17.1
Description
Terminal Module TM150 is used for sensing and evaluating several temperature sensors.
The temperature is measured in a temperature range from -99 °C to +250 °C for the
following temperature sensors:
● PT100 (with monitoring for wire breakage and short-circuit)
● PT1000 (with monitoring for wire breakage and short-circuit)
● KTY84 (with monitoring for wire breakage and short-circuit)
● PTC (with short-circuit monitoring)
● Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the evaluation can be
parameterized for 1x2-wire, 2x2-wire, 3-wire or 4-wire. There is no galvanic isolation in the
TM150.
A maximum of 12 temperature sensors can be connected at the TM150 Terminal Module.
Figure 4-33
150
Terminal Module TM150
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents