Table of Contents
Advertisement
Operation
8.4 Parameter
8.4
Parameter
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.4.1
Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
8.4.2
Parameter types
Parameter types
The following parameters are available:
● Adjustable parameters (write/read)
● Visualization parameters (read-only)
All these drive parameters can be read and changed via PROFIBUS using the mechanisms
defined in the PROFIdrive profile.
120
Adjustable parameters directly influence the response of a function, e.g. the ramp-up and
ramp-down time of a ramp-function generator.
Display parameters are used to display internal variables, e.g. the actual motor current.
Figure 8-2
Parameter types
SINAMICS SM150 6SL3815-7NP41-0AA1
Operating Instructions Rev.201910281301 EXAMPLE
Advertisement
Table of Contents
