Bico Technology: Interconnecting Signals - Siemens SINAMICS G150 Operating Instructions Manual

Function diagram
FP 8560
FP 8565
FP 8570
FP 8575
Parameters
• p0120
• p0130
• p0139[0...2]
• p0140
• p0170
• p0180
• p0186 [0...n]
• p0187[0...n]
• p0188[0...n]
• p0189[0...n]
• p0809[0...2]
• p0810
• p0811
• p0819[0...2]
• p0820[0...n]
• p0821[0...n]
• p0822[0...n]
• p0823[0...n]
• p0824[0...n]
6.3.4

BICO technology: interconnecting signals

Description
Every drive contains a large number of interconnectable input and output variables and
internal control variables.
The drive unit can be adapted to a wide range of requirements using BICO technology
(Binector Connector Technology).
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Command data sets (CDS)
Drive data set (DDS)
Encoder data set (EDS)
Motor data sets (MDS)
Power Module data sets (PDS) number
Motor data sets (MDS) number
Copy motor data set (MDS)
Encoder data sets (EDS) number
Command data set (CDS) number
Drive data set (DDS) number
Assigned motor data set (MDS)
Encoder 1 encoder data set number
Encoder 2 encoder data set number
Encoder 3 encoder data set number
Copy command data set CDS
BI: Command data set selection CDS bit 0
BI: Command data set selection CDS bit 1
Copy drive data set DDS
BI: Drive data set selection, bit 0
BI: Drive data set selection, bit 1
BI: Drive data set selection, bit 2
BI: Drive data set selection, bit 3
BI: Drive data set selection, bit 4
6.3 Basic information about the drive system
Operation
269