Siemens SINAMICS G150 Operating Instructions Manual page 353

3. Assigning the IP address and the name
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
4. Select online operation in STARTER.
Set the IP address in Windows XP
On the desktop, right-click on "Network environment" -> Properties -> double-click on
Network card and choose -> Properties -> Internet Protocol (TCP/IP) -> Properties -> Enter
the freely-assignable addresses.
Figure 6-39
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Properties of the Internet Protocol (TCP/IP)
6.9 Communication via PROFINET IO
Operation
353