Setpoint Sources - Siemens SINAMICS G150 Operating Instructions Manual

Operation

6.5 Setpoint sources

6.5 Setpoint sources
6.5.1 Analog inputs
Description
The customer terminal block TM31 features two analog inputs for specifying setpoints for
current or voltage signals.
In the factory setting, analog input 0 (terminal X521:1/2) is used as a current input in the
range 0 to 20 mA.
Precondition
The default setting for analog inputs was chosen during commissioning:
• STARTER (p1000):
• AOP30 (p1000):
Signal flow diagram
Figure 6-17 Signal flow diagram: analog input 0
Function diagram
FP 9566
FP 9568
284
"TM31 terminals"
"2: TM31 terminals"
TM31 – analog input 0 (AI 0)
TM31 – analog input 1 (AI 1)
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A