Siemens SINAMICS G150 Operating Instructions Manual page 391

Table 6- 46
No.
1
2
3
Table 6- 47
No.
2
3
6
7
8
9
10
11
12
13
14
15
19
TCP/IP Interface Object, Instance Number: F5 hex
Supported services
Class
Table 6- 48
No.
1
2
3
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Instance Attribute
Service Type Name
get, set UINT16 Commisioning
state
get INT16 Motor Type
get, set REAL Rated Current
get, set REAL Rated Voltage
get, set REAL Rated Power
get, set REAL Rated Frequency
get, set REAL Rated Tempera-
ture
get, set REAL Max Speed
get, set UINT16 Pole pair number
get, set REAL Torque Constant
get, set REAL Inertia
get, set REAL Base Speed
get, set REAL Cos Phi
• Get Attribute all
• Get Attribute single
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Name
Revision
Max Instance
Num of Instances
Value/explanation
p0010: commissioning parameter filter
p0300: motor type
p0305: rated motor current
p0304: rated motor voltage
p0307: rated motor power
p0310: rated motor frequency
p0605: Mot_temp_mod 1/2 / sensor threshold and
temperature value
p0322: maximum motor speed
p0314: motor pole pair number
p0316: motor torque constant
p0341: motor moment of inertia
p0311: rated motor speed
p0308: rated motor power factor
Instance
Name
Revision
Max Instance
Num of Instances
6.11 Communication via EtherNet/IP
• Get Attribute all
• Get Attribute single
• Set Attribute single
Operation
391