Siemens SINAMICS G150 Operating Instructions Manual page 604

Diagnosis/faults and alarms
10.2 Diagnosis
Parameter Name
Description
r0050 CO/BO: Command Data Set CDS effective
Displays the effective command data set (CDS)
r0070 CO: Actual DC link voltage
Displays the actual measured value of the DC link voltage.
r0206 Rated power unit power
Displays the rated power unit power for various load duty cycles.
r0207 Rated power unit current
Displays the rated power unit power for various load duty cycles.
r0208 Rated power unit line supply voltage
Displays the rated line supply voltage of the power unit.
r0209 Power unit, maximum current
Displays the maximum output current of the power unit.
VECTOR: key diagnostic parameters (details in List Manual)
Parameter Name
Description
r0002 Drive operating display
The value provides information about the current operating status and the conditions necessary to reach the
next status.
r0020 Speed setpoint smoothed
Displays the actual smoothed speed/velocity setpoint at the input of the speed/velocity controller or V/f char-
acteristic (after the interpolator).
r0021 CO: Actual speed value smoothed
Displays the smoothed actual value of the motor speed/velocity.
r0024 CO: Output frequency, smoothed
Displays the smoothed converter frequency.
r0026 CO: DC link voltage smoothed
Displays the smoothed actual value of the DC link.
r0027 CO: Absolute actual current, smoothed
Displays the smoothed actual value of the current.
r0031 Actual torque smoothed
Displays the smoothed actual torque.
r0034 CO: Motor utilization
Displays the motor utilization from the thermal I2t motor model.
604
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A