Operation
6.1
Chapter content
This chapter provides information on the following:
● Basic information about the drive system
● Command source selection via
- PROFIdrive
- terminal block
- NAMUR terminal block
● Setpoint input via
- PROFIdrive
- Analog inputs
- Motorized potentiometer
- Fixed setpoints
● Control via the AOP30 operator panel
● Communication according to PROFIdrive
● Communication via
- PROFIBUS DP
- PROFINET IO
- SINAMICS Link
- EtherNet/IP
- Modbus TCP
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
6
257