Overview Of Important Parameters - Siemens SINAMICS G150 Operating Instructions Manual

Sequence:
● The end customer tells the machine manufacturer the serial number of the memory card
and the Control Unit.
● The machine manufacturer links the STARTER project with the serial numbers of the
memory card (p7769) and the Control Unit (p7759).
● The machine manufacturer loads the STARTER project into the drive unit.
● Online, the machine manufacturer activates, after the download, the copy protection and
the know-how protection (p7765, p7767, p7768).
● The machine manufacturer saves the project using p0971 or p0977 onto the memory
card.
● The machine manufacturer takes the PS-ACX and possibly generated DCC-YDB files
from the "..\USER\SINAMICS\DATA" area of the memory card and sends them to the end
customer. (for example by E-mail).
● The end customer copies the files into the "..\USER\SINAMICS\DATA" area of his
memory card, inserts this into the Control Unit and switches on the drive unit.
● After power-up, the end customer saves the project (using p0971 or p0977); if required,
parameters must be reentered from the OEM exception list.
9.2.21.8

Overview of important parameters

• r7758[0...19]
• p7759[0...19]
• r7760
• p7761
• p7762
• p7763
• p7764[0...n]
• p7765
• p7766[0...29]
• p7767[0...29]
• p7768[0...29]
• p7769}0...20]
• r7843[0...20]
KHP: Know-how protection
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
KHP Control Unit serial number
KHP Control Unit reference serial number
Write protection/know-how protection status
Write protection
Write protection multi-master fieldbus system access behavior
KHP OEM exception list number of indices for p7764
KHP OEM exception list
KHP memory card copy protection
KHP password input
KHP password new
KHP password confirmation
KHP memory card reference serial number
Memory card serial number
Functions, monitoring, and protective functions
9.2 Drive functions
537