Parameters; Figure 8-1 Parameter Types - Siemens SINAMICS GL150 Operating Instructions & Installation Instructions

Operation

8.2 Parameters

Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.2 Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
● Operator panel
Parameter types
The following parameters are available:
● Adjustable parameters (write/read)
● Visualization parameters (read-only)
All these drive parameters can be read and changed via PROFIBUS using the mechanisms
defined in the PROFIdrive profile.
90
Adjustable parameters directly influence the response of a function, e.g. the ramp-up and
ramp-down time of a ramp-function generator.
Display parameters are used to display internal variables, e.g. the actual motor current.
Figure 8-1 Parameter types
SINAMICS GL150 6SL38502UM114PA0Z
Operating Instructions Rev.201910281441 EXAMPLE