Profienergy Applications - Siemens SINAMICS G150 Operating Instructions Manual

6.9.3.9

PROFIenergy applications

Applications for PROFIenergy and for programming with SIMATIC S7 can be found under
the following link: PROFIenergy applications
(http://support.automation.siemens.com/WW/view/en/20229805/136000&cspltfrm=12&cssw=
0&csbinh=0).
6.9.3.10 Function diagrams and parameters
Function diagram
FP 2381
FP 2382
FP 2610
Parameter
• r5600
• p5602[0...1] Pe hibernation pause time, minimum
• p5606[0...1] Pe hibernation duration, maximum
• p5611
• p5612[0...1] Pe energy-saving properties, mode-dependent
• r5613.0...1
• p5614
6.9.4 Support of I&M data sets 1...4
Identification & Maintenance (I&M)
I&M data records contain information for a standardized and simplified identification and
maintenance of PROFINET devices. I&M data sets 1...4 contain plant-specific information,
such as the installation location and date. PROFINET supports I&M data sets 0...4.
I&M data sets 1...3 can be set with the SIMATIC Manager (STEP 7) and also with HW
Config (STEP 7).
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
PROFIenergy - Control commands / query commands
PROFIenergy - States
Sequence control - Sequencer
Pe hibernation ID
Pe energy-saving properties, general
CO/BO: Pe energy-saving active/inactive
BI: Set Pe switching on inhibited signal source
6.9 Communication via PROFINET IO
Operation
367