Siemens SINAMICS G150 Operating Instructions Manual page 605

Parameter Name
Description
r0035 CO: Motor temperature
If r0035 does not equal -200.0 °C, the following applies:
This temperature indicator is valid.
•
An KTY sensor is connected.
•
If using an asynchronous motor, the thermal motor model is activated (p0600 = 0 or p0601 = 0).
•
If r0035 equals -200.0 °C, the following applies:
This temperature indicator is invalid (temperature sensor fault).
•
An PTC sensor is connected.
•
If using a synchronous motor, the thermal motor model is activated (p0600 = 0 or p0601 = 0).
r0037 CO: Power unit temperatures
Displays the measured temperatures in the power unit.
r0046 CO/BO: Missing enable signals
Displays missing enable signals that are preventing the closed-loop drive control from being commissioned.
r0049 Motor data set/encoder data set active (MDS, EDS)
Displays the effective motor data set (MDS) and the effective encoder data sets (EDS).
r0050 CO/BO: Command Data Set CDS effective
Displays the effective command data set (CDS)
r0051 CO/BO: Drive Data Set DDS effective
Effective drive data set (DDS) display.
r0056 CO/BO: Status word, closed-loop control
Displays the status word of the closed-loop control.
r0063 CO: Speed actual value
Displays the actual speed for speed control and V/f control.
r0066 CO: Output frequency
Displays the output frequency of the Motor Module.
r0070 CO: Actual DC link voltage
Displays the measured actual value of the DC link voltage.
r0072 CO: Output voltage
Displays the actual output voltage of the power unit (Motor Module).
r0082 CO: Active power actual value
Displays the instantaneous active power.
r0206 Rated power unit power
Displays the rated power unit power for various load duty cycles.
r0207 Rated power unit current
Displays the rated power unit power for various load duty cycles.
r0208 Rated power unit line supply voltage
Displays the rated line supply voltage of the power unit.
r0209 Power unit, maximum current
Displays the maximum output current of the power unit.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Diagnosis/faults and alarms
10.2 Diagnosis
605