Terminal assignment for the "PROFIdrive NAMUR" default setting
When you choose the "PROFIdrive NAMUR" default setting, the terminal assignment is as
follows (as with option B00):
Figure 6-16
Control word 1
The bit assignment for control word 1 is described in "Description of the control words and
setpoints".
Status word 1
The bit assignment for status word 1 is described in "Description of the status words and
actual values".
Changing over the command source
The command source can be changed over using the LOCAL/REMOTE key on the AOP30.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Terminal assignment for the "PROFIdrive NAMUR" default setting
Operation
6.4 Command sources
283