Siemens SINAMICS G150 Operating Instructions Manual page 57

Note
Installing the canopies with cabinets connected in series
There are overlaps on the sides of the canopies to prevent water dripping into the spaces
between cabinets connected in series. When fitting the canopies, make sure these overlaps
engage.
Fitting a hood to increase the degree of protection to IP23/IP43/IP54 (option M23/M43/M54)
Figure 3-16
1. Remove the crane transport assembly (if fitted).
2. Make sure that a perforated top cover is not fitted on the top of the cabinet (depending on
production requirements, this can be fitted at a later stage). If a top cover is installed, it
must be removed.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Attaching a hood
Mechanical installation
3.3 Mounting
57