Siemens SINAMICS G150 Operating Instructions Manual page 220

Commissioning
5.3 Procedure for commissioning with STARTER
Configuring the motor holding brake
Figure 5-23
⇒ Under Holding brake configuration: choose the appropriate setting for your device
configuration:
● 0: No motor holding brake being used
● 1: Motor holding brake like sequence control
● 2: Motor holding brake always open
● 3: Motor holding brake like sequence control, connection via BICO
⇒ When a motor holding brake is selected, you can also activate the "Extended brake
control" function module.
⇒ Click Continue >
220
Configuring the motor holding brake
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A