The Aop30 Operator Panel - Siemens SINAMICS G150 Operating Instructions Manual

Commissioning

5.4 The AOP30 operator panel

5.4 The AOP30 operator panel
Description
An operator panel is located in the cabinet door of the cabinet unit for operating, monitoring,
and commissioning tasks. It has the following features:
● Graphic-capable, back-lit LCD for plain-text display and a "bar-type display" for process
variables
● LEDs for indicating the operating modes
● Help function describing causes of and remedies for faults and alarms
● Keypad for controlling drives during operation
● LOCAL/REMOTE switchover for selecting the control terminal (master control assigned to
operator panel or Customer Terminal Block / PROFIdrive)
● Numeric keypad for entering setpoint or parameter values
● Function keys for prompted navigation through the menus
● Two-stage security concept to protect against accidental or unauthorized changes to
settings
● IP54 degree of protection (when installed).
Figure 5-37 Components of the cabinet unit operator panel (AOP30)
240
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A