Siemens SINAMICS G150 Operating Instructions Manual page 288

Operation
6.5 Setpoint sources
Precondition
The default setting for the fixed speed setpoints was chosen during commissioning:
• STARTER (p1000):
• AOP30 (p1000):
Signal flow diagram
Figure 6-19
Function diagram
FP 3010
Parameter
• p1001
• p1002
• p1003
• r1024
Note
Other fixed speed setpoints are available using p1004 to p1015. They can be selected using
p1020 to p1023.
288
"Fixed setpoint"
"4: Fixed setpoint"
Signal flow diagram: Fixed speed setpoints
Fixed speed setpoints
Fixed speed setpoint 01
Fixed speed setpoint 02
Fixed speed setpoint 03
Fixed speed setpoint effective
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A