Fax Detection - NEC IntraMail UX5000 Manual

Fax Detection

Description
Automatically transfer incoming fax calls to a fax machine.
The Automated Attendant can detect incoming fax calls and transfer them to a fax machine. With Fax Detec-
tion enabled, after the Automated Attendant answers a call it listens for incoming fax CNG tone. If it detects
the tone, it does an unscreened transfer of the call to the specified company fax machine. The incoming fax
then prints out on the company fax machine. If you disable Fax Detection, the Automated Attendant will not
detect and route incoming fax calls.
Conditions
● None
Default Setting
● Disabled
Programming
1. To set up Fax Detection for a Routing Mailbox:
1.
47-08-04: F
Enter 1 (Yes).
2.
47-08-05: F
Specify the extension that should receive faxes from the Call Routing Mailbox.
2. To set up Fax Detection for a Directory Dialing Mailbox:
1.
47-15-07: F
Enter 1 (Yes).
2.
47-15-09: F
Specify the extension that should receive faxes from the Call Routing Mailbox.
Other Related Features
None
Operation
N/A
UX IntraMail Manual
D ( 277)
AX ETECTION PAGE
✔ By default, this option is disabled ( 0 ).
E ( 277)
AX XTENSION PAGE
- Normally, this is the extension number of the analog port to which the fax machine is con-
nected.
✔ By default, there is no fax extension specified.
D ( 306)
AX ETECTION PAGE
✔ By default, this option is disabled ( 0 ).
E ( 307)
AX XTENSION PAGE
- Normally, this is the extension number of the analog port to which the fax machine is con-
nected.
✔ By default, there is no fax extension specified.
Fax Detection
IntraMail Features ◆ 105