Cabling And Setting Ip4Ww-2Bridb-C1; Table 2-11 Rj-61 Co/Pf Pin-Outs (J2, J3); Table 2-12 Rj-61 Bri Pin-Outs (S-Bus, T-Bus); Table 2-13 Switch Setting Of 2Bridb-C1 - NEC SL1100 Hardware Manual

ISSUE 1.0
3.4.5

Cabling and Setting IP4WW-2BRIDB-C1

This IP4WW-2BRIDB-C1 PCB provides two RJ-61 BRI connections.
3.4.5.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for S-Bus and T-Bus connections.
3.4.5.2 Switch Setting
Switches Location of 2BRIDB-C1 shows the location of the connectors and switches on the
IP4WW-2BRIDB-C1.
1. Set the switches J12 to J17 according to the system, referring the Switch Setting of 2BRIDB-C1.
Switch No.
J12/J15
Hardware Manual

Table 2-11 RJ-61 CO/PF Pin-Outs (J2, J3)

Pin No.
1
2
3
4
5
6
7
8

Figure 2-71 Connectors of 2BRIDB-C1

Table 2-12 RJ-61 BRI Pin-Outs (S-Bus, T-Bus)

Pin No.
Connector-2BRIDB-J2 (BRI1),
J3 (BRI2) S-Bus Connection
1
2
3
4
5
6
7
8

Table 2-13 Switch Setting of 2BRIDB-C1

Switch Position
ON (default) Termination register is ON.
This SW should be ON in case:
CO1-4 (J2): CO Port
Connector (RJ-61)
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
RJ-61 Cable
-
-
RA
TA
TB
RB
-
-
T-Bus Point-to-Point connection is selected.

PF1 (J3): PF Tel Port Connector
(RJ-61)
-
-
-
R1 (Ring for port 1)
T1 (Tip for port 1)
-
-
-
RJ-61 Cable
Connector-2BRIDB-J2 (BRI1), J3
(BRI2) T-Bus Connection
-
-
TA
RA
RB
TB
-
-
Description
SL1100
2-45